toreteens.blogg.se - Home depot liquid defense

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. If this product is found not to perform as specified on the label during the warranty period, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergentįor disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.īehr Process Corporation warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home.Cooler temperatures or higher humidity may prolong drying time.Darker colors may require additional dry time between coats.Certain colors may required additional coats for complete hide.Do not thin if user a roller or brush however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.Use a high quality 3/8-1/2 nap roller cover, nylon/polyester brush or airless sprayer (.015-.019" spray tip, 60 mesh filter).

Intermix containers of same product to ensure color and sheen uniformity.

Apply when air and surface temperatures are between 50-90☏ (10-32° C).

For drastic color changes or when applying deep colors denoted with a dagger on the color chip, apply a tinted primer coat of BEHR ULTRA SCUFF DEFENSE Paint if needed.

For heavy stains, test for stain bleed-through by applying BEHR ULTRA SCUFF DEFENSE Paint to a small section. If stain bleeds through, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, a longer dry time is needed before topcoating.

Lock in stains with BEHR ULTRA SCUFF DEFENSE Paint as a spot primer.

Use BEHR ULTRA SCUFF DEFENSE as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.

Allow new stucco, plaster and masonry to cure for 30 days before painting.

Remove all dust with a damp cloth, allow to dry.

Scuff sand glossy surfaces and repair imperfections.

Remove mildew stains with a mildew stain removing product.

Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.

All surfaces should be properly prepared and cleaned.

Preparation & Prime Blank space if empty. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings. Properly prepared coated and uncoated Interior surfaces.